CCNA 2 v7 Modules 14 – 16: Routing Concepts and Configuration Full Exam Answers

1. Which function on a Cisco router permits the forwarding of traffic for which there is no certain route?

next-hopgatemeans of last resort*route sourceoutgoing interface

2. Which 3 advantages are gave by static routing? (Choose 3.)

Static routing does not advertise over the network, hence giving much better protection.*Configuration of static courses is error-complimentary.Static paths range well as the network-related grows.

You are watching: Which type of static route that is configured on a router uses only the exit interface?

Static routing frequently uses less netjob-related bandwidth and fewer CPU operations than dynamic routing does.*The route a static path uses to send information is recognized.*No intervention is forced to preserve transforming course information.

3. What are 2 features of dynamic routing protocols? (Choose two.)

to keep routing tables*to ascertain low rexternal overheadto prevent exposing network-related informationto discover the network*to choose the path that is specified by the administrator

4. What is an advantage of using dynamic routing protocols instead of static routing?

less complicated to implementmore secure in managing routing updatesfewer router resource overhead requirementscapability to actively search for brand-new paths if the present course becomes unavailable​*

5. What happens to a static path enattempt in a routing table as soon as the outgoing interface linked with that path goes right into the down state?

The static path is rerelocated from the routing table.*The router polls neighbors for a replacement path.The router automatically redirects the static course to use another interface.The static course remains in the table because it was identified as static.

Explanation: When the interconfront connected through a static route goes down, the rexternal will rerelocate the course because it is no longer valid.

6. What is a characteristic of a static route that matches all packets?

It offers a single network resolve to send multiple static routes to one location resolve.It identifies the gatemeans IP resolve to which the router sends out all IP packets for which it does not have actually a learned or static path.*It backs up a route already uncovered by a dynamic routing protocol.It is configured with a higher bureaucratic distance than the original dynamic routing protocol has.

Explanation: A default static path is a route that matches all packets. It identifies the gatemethod IP attend to to which the router sends all IP packets for which it does not have a learned or static course. A default static course is sindicate a static path via as the location IPv4 address. Configuring a default static course creates a gatemeans of last rekind.

7. When would it be even more helpful to use a dynamic routing protocol instead of static routing?

in an company wbelow routers suffer from performance issueboy a stub netoccupational that has a solitary exit pointin an company via a smaller netoccupational that is not meant to thrive in sizeon a network wright here tbelow is most topology changes*

Explanation: Dynamic routing protocols consume even more rexternal sources, are suitable for larger networks, and are more helpful on netfunctions that are prospering and also altering.

8. Which path would be offered to forward a packet through a resource IP deal with of and a destination IP attend to of

C is straight connected, GigabitEthernet0/1O <110/65> by means of, 00:01:20, Serial0/1/0*S* <1/0> using is straight connected, GigabitEthernet0/0

Explanation: Even though OSPF has a higher administrative distance value (much less trustworthy), the best match is the path in the routing table that has the the majority of number of much left corresponding bits.

9. Refer to the exhilittle.


What is the bureaucratic distance value of the route for router R1 to reach the location IPv6 attend to of 2001:DB8:CAFE:4::A?


Explanation: The RIP route via the resource code R is provided to forward information to the location IPv6 attend to of 2001:DB8:CAFE:4::A. This route has actually an AD worth of 120.

10. Which worth in a routing table represents trustworthiness and is supplied by the rexternal to identify which path to install right into the routing table when there are multiple courses towards the very same destination?

administrative distance*metricoutgoing interfacerouting protocol

Explanation: The bureaucratic distance represents the trustworthiness of a particular route. The lower an bureaucratic distance, the even more trustworthy the learned route is. When a rexternal learns multiple courses toward the same destination, the rexternal provides the bureaucratic distance value to determine which course to place into the routing table. A metric is used by a routing protocol to compare routes obtained from the routing protocol. An departure interchallenge is the interface provided to send a packet in the direction of the location netoccupational. A routing protocol is offered to exreadjust routing updays between 2 or more adjacent routers.

12. Refer to the graphic.


Which command would be supplied on router A to connumber a static route to straight traffic from LAN A that is destined for LAN C?

A(config)# ip route ip course ip course ip route ip course*

Explanation: The location netjob-related on LAN C is and also the next-hop attend to from the perspective of router A is

13. On which 2 routers would a default static route be configured? (Choose 2.)

any router wbelow a backup path to dynamic routing is required for reliabilitythe rexternal that serves as the gateway of last resortany type of router running an IOS before 12.0stub rexternal link to the remainder of the corporate or campus networkedge router connection to the ISP*

Explanation: A stub router or an edge router linked to an ISP has actually just one various other rexternal as a link. A default static route functions in those cases because all website traffic will certainly be sent out to one location. The destination rexternal is the gateway of last retype. The default route is not configured on the gateway, however on the rexternal sfinishing website traffic to the gateway. The router IOS does not matter.

14. Refer to the exhibit.


This network has two relationships to the ISP, one via router C and also one by means of router B. The serial attach in between rexternal A and also router C supports EIGRP and is the primary link to the Web. If the primary link falls short, the administrator requirements a floating static route that avoids recursive route lookups and any potential next-hop concerns led to by the multiaccessibility nature of the Ethernet segment via router B. What need to the administrator configure?

Create a static course pointing to through an ADVERTISEMENT of 95.Create a completely stated static course pointing to Fa0/0 through an ADVERTISEMENT of 1.Create a fully stated static course pointing to Fa0/0 through an AD of 95.*Create a static course pointing to via an ADVERTISEMENT of 1.Create a static path pointing to Fa0/0 through an ADVERTISEMENT of 1.

Explanation: A floating static course is a static route through an bureaucratic distance higher than that of one more route currently in the routing table. If the course in the table disshows up, the floating static path will be put into the routing table in its area. Internal EIGRP has actually an AD of 90, so a floating static course in this scenario would should have actually an AD better than 90. Also, once developing a static path to a multiaccessibility interconfront like a FastEthernet segment a totally mentioned course should be provided, via both a next-hop IP attend to and an departure interconfront. This prevents the rexternal from doing a recursive lookup, but still ensures the correct next-hop device on the multiaccessibility segment forwards the packet.

15. What is a characteristic of a floating static route?

When it is configured, it creates a gatemeans of last rekind.​It is supplied to administer load balancing between static paths.It is sindicate a static course with as the destination IPv4 attend to.It is configured with a higher governmental distance than the original dynamic routing protocol has actually.*

Explanation: Floating static paths are static paths supplied to carry out a backup course to a primary static or dynamic route, in the occasion of a link failure. They should be configured via a higher bureaucratic distance than the original dynamic routing protocol has. A default static course is sindicate a static path with as the location IPv4 address. Configuring a default static path creates a gateway of last retype.

16. What network predeal with and also prefix-size combicountry is provided to produce a default static path that will complement any IPv6 destination?


Explanation: A default static course configured for IPv6, is a netoccupational presolve of all zeros and also a predeal with mask of 0 which is expressed as ::/0.

17. Consider the following command:

ip route 5What does the 5 at the end of the command signify?

leave interfacemaximum number of hops to the networkmetricgovernmental distance*

Explanation: The 5 at the end of the command signifies administrative distance. This worth is included to floating static paths or routes that just show up in the routing table as soon as the wanted course has actually gone down. The 5 at the finish of the command also signifies bureaucratic distance configured for the static course. This value suggests that the floating static path will appear in the routing table as soon as the wanted path (with an governmental distance less than 5) is dvery own.

18. Refer to the exhibit.


The routing table for R2 is as follows:

Explanation: When a static path is configured through the following hop address (as in the case of the network), the output of the display ip route command also lists the route as “via” a specific IP deal with. The router hregarding look up that IP attend to to determine which interface to sfinish the packet out. Because the IP address of is component of network, the router sends the packet out interchallenge Serial0/0/1.

19. An administrator worries the ipv6 path 2001:db8:acad:1::/32 gigabitethernet0/0 2001:db8:acad:6::1 100 command on a rexternal. What administrative distance is assigned to this route?


Explanation: The command ipv6 path 2001:db8:acad:1::/32 gigabitethernet0/0 2001:db8:acad:6::1 100 will certainly connumber a floating static course on a router. The 100 at the finish of the command specifies the bureaucratic distance of 100 to be applied to the route.

20. Refer to the exhibit.


Which default static path command would allow R1 to perhaps reach all unknown networks on the Internet?

R1(config)# ipv6 course 2001:db8:32::/64 G0/0R1(config)# ipv6 course ::/0 G0/0 fe80::2R1(config)# ipv6 route 2001:db8:32::/64 G0/1 fe80::2R1(config)# ipv6 route ::/0 G0/1 fe80::2*

Explanation: To course packets to unwell-known IPv6 networks a router will require an IPv6 default route. The static route ipv6 course ::/0 G0/1 fe80::2 will certainly match all netfunctions and also send packets out the stated departure interchallenge G0/1 towards R2.

21. Refer to the exhibit.


The netjob-related engineer for the company that is presented wants to use the main ISP connection for all exterior connectivity. The backup ISP connection is offered just if the main ISP connection fails. Which set of regulates would certainly attain this goal?

ip course s0/0/0ip route s0/1/0

ip course s0/0/0ip route s0/1/0 10*

ip course route 10

ip route route

Explanation: A static course that has no bureaucratic distance added as part of the command has actually a default governmental distance of 1. The backup connect must have a number higher than 1. The correct answer has actually an administrative distance of 10. The various other quad zero path would certainly load balance packets throughout both links and both web links would certainly appear in the routing table. The staying answers are ssuggest static routes (either a default route or a floating static default route).

22. Refer to the exhilittle bit.


Which set of regulates will configure static routes that will enable the Park and also the Alta routers to a) forward packets to each LAN and also b) straight all various other website traffic to the Internet?

Park(config)# ip path ip route ip path s0/0/0*

Park(config)# ip route ip route ip course s0/0/0

Park(config)# ip route ip path ip path

Park(config)# ip course ip route ip route s0/0/1

Explanation: The LAN connected to the rexternal Park is a stud netjob-related, therefore, a default path have to be provided to forward netoccupational web traffic destined to non-neighborhood netfunctions. The router Alta connects to both the internet and also the Park rexternal, it would certainly need 2 static courses configured, one toward the internet and also the other toward the LAN linked to the router Park.

23. Refer to the exhilittle.


The tiny firm presented offers static routing. Users on the R2 LAN have actually reported a problem with connectivity. What is the issue?

R1 needs a static course to the R2 LAN.*R2 demands a static route to the R1 LANs.R1 demands a default path to R2.R2 needs a static course to the Net.R1 and R2 should use a dynamic routing protocol.

Explanation: R1 has a default route to the Web. R2 has a default path to R1. R1 is absent a static route for the network. Any traffic that reached R1 and also is destined for will be routed to the ISP.

24. Refer to the exhibit.


An administrator is attempting to install an IPv6 static path on router R1 to reach the network-related attached to rexternal R2. After the static path command is entered, connectivity to the netoccupational is still failing. What error has been made in the static route configuration?

The next hop deal with is incorrect.The interface is incorrect.*The destination network is incorrect.The netjob-related presettle is incorrect.

Explanation: In this example the interchallenge in the static path is incorrect. The interface have to be the exit interconfront on R1, which is s0/0/0.

25. Refer to the exhilittle.


How was the organize route 2001:DB8:CAFE:4::1/128 set up in the routing table?

The course was dynamically developed by router R1.The course was dynamically learned from an additional router.The course was manually gone into by an administrator.*The route was instantly mounted as soon as an IP deal with was configured on an active interconfront.

Explanation: A hold course is an IPv6 course with a 128-bit mask. A host course have the right to be mounted in a routing table immediately when an IP address is configured on a router interface or manually if a static path is created.

26. Refer to the exhilittle bit.


HostA is attempting to contact ServerB. Which 2 statements effectively explain the addressing that HostA will certainly geneprice in the process? (Choose two.)

A packet through the destination IP resolve of RouterA.A framework via the destination MAC attend to of SwitchA.A packet with the location IP address of ServerB.*A framework through the destination MAC deal with of RouterA.*A structure via the destination MAC resolve of ServerB.A packet via the location IP address of RouterB.

Explanation: In order to send data to ServerB, HostA will generate a packet that includes the IP address of the location tool on the remote network-related and also a structure that consists of the MAC address of the default gatemeans gadget on the regional netoccupational.

27. Refer to the exhilittle.


A ping from R1 to is effective, yet a ping from R1 to any deal with in the network stops working. What is the reason of this problem?

Tbelow is no gatemethod of last retype at R1.The static route for is mistakenly configured.*A default route is not configured on R1.The serial interface between the 2 routers is dvery own.

28. Refer to the exhilittle bit.


An administrator is attempting to install a default static path on rexternal R1 to reach the Site B netoccupational on router R2. After entering the static route command, the path is still not showing up in the routing table of router R1. What is avoiding the course from installing in the routing table?

The netmask is incorrect.The exit interconfront is absent.The following hop address is incorrect.*The location netoccupational is incorrect.

29. Refer to the exhibit.


The Branch Router has actually an OSPF neighbor connection with the HQ rexternal over the network. The netoccupational attach should serve as a backup when the OSPF attach goes dvery own. The floating static path command ip course S0/1/1 100 was issued on Branch and also currently website traffic is utilizing the backup connect even when the OSPF connect is up and also functioning. Which readjust need to be made to the static route command so that traffic will just use the OSPF connect when it is up?

Add the following hop neighbor attend to of the governmental distance to 1.Change the location network to the administrative distance to 120.*

Explanation: The difficulty through the current floating static path is that the bureaucratic distance is collection as well low. The governmental distance will certainly need to be better than that of OSPF, which is 110, so that the rexternal will certainly only use the OSPF attach as soon as it is up.

30. What characteristic completes the adhering to statement?When an IPv6 static route is configured, the next-hop attend to can be ……

a destination hold path through a /128 prefix.the “present ipv6 path static” IPv6 link-regional resolve on the surrounding rexternal.*the interface type and interconfront number.

31. Gateway of last rekind is not set. is otherwise subnetted, 7 subnets, 3 masksO <110/10> via, 00:00:24, Serial0/0/0O <110/20> through, 00:00:56, Serial 0/0/1O <110/10> through, 00:00:24, Serial 0/0/0C is straight associated, GigabitEthernet0/0L is straight connected, GigabitEthernet0/0C is straight connected, GigabitEthernet0/1L is straight associated, GigabitEthernet0/1172.19.39.0/24 is variably subnetted, 4 subnets, 2 masksC is directly associated, Serial0/0/0L is directly connected, Serial0/0/0C is directly connected, Serial0/0/1L is straight associated, Serial0/0/1S <1/0> via, 00:00:24, Serial0/0/0R1#

Refer to the exhilittle bit. Which interconfront will be the exit interconfront to forward a file packet that has the destination IP resolve

GigabitEthernet0/1None, the packet will be dropped.GigabitEthernet0/0*Serial0/0/1

32. Refer to the exhilittle bit.


What routing solution will enable both PC A and PC B to access the Internet through the minimum amount of router CPU and netoccupational bandwidth utilization?

Configure a dynamic routing protocol between R1 and Edge and also advertise all paths.Configure a static route from R1 to Edge and also a dynamic course from Edge to R1.Configure a static default path from R1 to Edge, a default course from Edge to the Internet, and also a static course from Edge to R1.*Connumber a dynamic course from R1 to Edge and a static route from Edge to R1.

Explanation: Two paths need to be created: a default route in R1 to reach Edge and a static path in Edge to reach R1 for the rerevolve website traffic. This is a ideal solution once PC A and also PC B belengthy to stub networks. Moreover, static routing consumes less bandwidth than dynamic routing.

33. Refer to the exhilittle.


What would take place after the IT administrator enters the brand-new static route?

The static path would certainly be entered into the running-config however not shown in the routing table.The course learned from RIP would certainly be replaced via the static path.*The default path would certainly be reinserted with the static path.The static path is added to the existing routes in the routing table.

Explanation: A route will be set up in a routing table if tright here is not one more routing resource through a reduced administrative distance. If a course via a lower governmental distance to the very same destination network-related as a current course is entered, the route with the reduced bureaucratic distance will relocation the course through a greater bureaucratic distance.

34. What 2 pieces of information are required in a fully stated static route to get rid of recursive lookups? (Choose two.)

the interchallenge ID of the next-hop neighborthe interface ID leave interface*the IP deal with of the leave interfacethe IP resolve of the next-hop neighbor*the administrative distance for the destination network

Explanation: A fully specified static route can be offered to protect against recursive routing table lookups by the router. A completely mentioned static route contains both the IP attend to of the next-hop rexternal and the ID of the departure interconfront.

35. Refer to the exhilittle.


Which command will properly connumber an IPv6 static route on R2 that will certainly enable website traffic from PC2 to reach PC1 without any kind of recursive lookups by router R2?

R2(config)# ipv6 course ::/0 2001:db8:32::1R2(config)# ipv6 course 2001:db8:10:12::/64 S0/0/0*R2(config)# ipv6 route 2001:db8:10:12::/64 2001:db8:32::1R2(config)# ipv6 path 2001:db8:10:12::/64 S0/0/1

Explanation: A nonrecursive course have to have an departure interface specified from which the location network-related deserve to be got to. In this example 2001:db8:10:12::/64 is the destination netoccupational and also R2 will use departure interface S0/0/0 to reach that network. As such, the static course would certainly be ipv6 course 2001:db8:10:12::/64 S0/0/0.

36. Refer to the exhilittle bit.


Which static route would certainly an IT technician enter to create a backup course to the netjob-related that is just supplied if the main RIP learned course fails?

ip route s0/0/0ip route s0/0/0 121*ip course s0/0/0 111ip course s0/0/0 91

Explanation: A backup static route is called a floating static route. A floating static course has actually an administrative distance greater than the administrative distance of another static route or dynamic route.

37. Open the PT Activity. Percreate the tasks in the task instructions and also then answer the question.


A user reports that PC0 cannot visit the internet server Troubleshoot the network-related configuration to recognize the difficulty.What is the reason of the problem?

The clock rate on one of the serial links is configured incorrectly.A serial interconfront on Branch is configured mistakenly.The DNS server address on PC0 is configured mistakenly.Routing between HQ and Branch is configured erroneously.*

Explanation: In order to allow interaction to remote networks, proper routing, either static or dynamic, is crucial. Both routers must be configured via a routing strategy.

38. Match the routing table enattempt to the corresponding function. (Not all alternatives are provided.)


39. Refer to the exhibit.


COMPUTER A sends out a request to Server B. What IPv4 attend to is used in the location field in the packet as the packet leaves PC A?*

Explanation: The destination IP resolve in packets does not adjust alengthy the course in between the resource and also location.

40. What does R1 usage as the MAC attend to of the location when creating the structure that will certainly go from R1 to Server B?


If the location MAC attend to that corresponds to the IPv4 deal with is not in the ARP cache, R1 sends out an ARP request.*R1 provides the destination MAC address of S1.The packet is encapsulated into a PPP framework, and also R1 adds the PPP destination attend to to the structure.R1 leaves the area blank and also forwards the information to the COMPUTER.

Explanation: Communication inside a regional netoccupational offers Address Resolution Protocol to obtain a MAC deal with from a well-known IPv4 deal with. A MAC resolve is needed to construct the framework in which the packet is encapsulated.

41. What route would have actually the lowest governmental distance?

a route got through the OSPF routing protocola straight connected network*a static routea route received through the EIGRP routing protocol

Explanation: The most believable route or the route through the lowest administrative distance is one that is directly associated to a rexternal.

42. A network-related administrator configures the interface fa0/0 on the router R1 via the command also ip address However before, when the administrator problems the command display ip course, the routing table does not present the straight connected netjob-related. What is the feasible reason of the problem?

The subnet mask is incorrect for the IPv4 deal with.The interchallenge fa0/0 has actually not been triggered.*The configuration requirements to be saved initially.No packets with a destination netoccupational of have been sent out to R1.

Explanation: A directly linked network-related will certainly be added to the routing table once these 3 problems are met: (1) the interface is configured via a valid IP address; (2) it is set off with no shutdown command; and (3) it receives a carrier signal from an additional gadget that is connected to the interconfront. An incorrect subnet mask for an IPv4 deal with will not proccasion its appearance in the routing table, although the error may proccasion effective interactions.

43. A rexternal has supplied the OSPF protocol to learn a course to the netjob-related. Which command also will certainly implement a backup floating static route to this network?

ip route S0/0/0 100ip route S0/0/0 200ip course S0/0/0 200*ip route S0/0/0 100

Explanation: OSPF has an governmental distance of 110, so the floating static course need to have an bureaucratic distance greater than 110. Due to the fact that the targain netjob-related is, that static course need to use the netjob-related and a netmask of

44. Consider the complying with command:

ip path 5

How would an administrator test this configuration?

Delete the default gateway path on the rexternal.Manually shut down the router interchallenge used as a major route.*Ping from the netoccupational to the attend to.Ping any valid attend to on the netjob-related.

Explanation: A floating static is a backup route that only appears in the routing table when the interface provided through the main course is dvery own. To test a floating static path, the path need to be in the routing table. Thus, shutting down the interface provided as a major route would permit the floating static route to show up in the routing table.

45. Refer to the exhilittle.


Which form of IPv6 static path is configured in the exhibit?

floating static routefully mentioned static routerecursive static route*directly attached static route

Explanation: The path gave points to one more attend to that need to be looked up in the routing table. This provides the route a recursive static course.

46. What characteristic completes the complying with statement?When an IPv6 static route is configured, it is initially vital to connumber ……

the next-hop resolve of two different nearby routers.the “ipv6 unicast-routing” command.*an IPv6 link-neighborhood address on the nearby governmental distance of 2.

47. Gateway of last retype is not collection. is variously subnetted, 7 subnets, 3 masksO <110/10> by means of, 00:00:24, Serial0/0/0O <110/20> via, 00:00:56, Serial 0/0/1O <110/10> by means of, 00:00:24, Serial 0/0/0C is directly linked, GigabitEthernet0/0L is straight associated, GigabitEthernet0/0C is directly connected, GigabitEthernet0/1L is straight associated, GigabitEthernet0/1172.18.32.0/24 is variably subnetted, 4 subnets, 2 masksC is directly linked, Serial0/0/0L is directly linked, Serial0/0/0C is straight associated, Serial0/0/1L is directly connected, Serial0/0/1S <1/0> through, 00:00:24, Serial0/0/0R1#

Refer to the exhibit. Which interconfront will certainly be the leave interconfront to forward a documents packet that has actually the destination IP resolve

GigabitEthernet0/0GigabitEthernet0/1Serial0/0/0*None, the packet will be dropped.

48. Open the PT Activity. Perdevelop the work in the task instructions and also then answer the question.A user reports that PC0 cannot visit the web server Troubleshoot the network-related configuration to determine the problem.What is the cause of the problem?

The clock rate on among the serial web links is configured erroneously.A serial interconfront on Branch is configured mistakenly.The DNS server attend to on PC0 is configured wrongly.Routing between HQ and Branch is configured wrongly.*

Explanation: In order to enable communication to remote networks, correct routing, either static or dynamic, is essential. Both routers have to be configured via a routing strategy.

49. Consider the following command:

ip course 5

Which path would have to go down in order for this static course to appear in the routing table?

a default routea static route to the network*an OSPF-learned course to the networkan EIGRP-learned path to the network

Explanation: The governmental distance of 5 included to the finish of the static course creates a floating static instance for a static path that goes dvery own. Static courses have a default administrative distance of 1. This course that has an administrative distance of 5 will not be inserted right into the routing table unless the previously gotten in static course to the goes down or was never gone into. The bureaucratic distance of 5 added to the finish of the static path configuration creates a floating static path that will be inserted in the routing table as soon as the primary path to the very same destination netoccupational goes down. By default, a static path to the netoccupational has an administrative distance of 1. Thus, the floating path with an bureaucratic distance of 5 will not be placed into the routing table unmuch less the previously entered static course to the goes down or was never gone into. Due to the fact that the floating course has actually an administrative distance of 5, the route is preferred to an OSPF-learned route (through the bureaucratic distance of 110) or an EIGRP-learned path (through the bureaucratic distance of 110) to the very same location netoccupational.

50. What are 2 advantages of static routing over dynamic routing? (Choose 2.)

Static routing is even more secure bereason it does not advertise over the network-related.*Static routing scales well through widening networks.Static routing calls for exceptionally little bit understanding of the network-related for correct implementation.Static routing offers fewer router resources than dynamic routing.*Static routing is fairly simple to connumber for big networks.

Explanation: Static routing needs a thostormy knowledge of the whole netoccupational for proper implementation. It have the right to be at risk to errors and does not range well for huge netfunctions. Static routing offers fewer router sources, bereason no computing is required for updating courses. Static routing have the right to likewise be even more secure because it does not advertise over the network-related.

51. What characteristic completes the complying with statement?When an IPv6 static path is configured, it is possible that the exact same IPv6 link-neighborhood attend to is supplied for …

a location organize route through a /128 presolve.the “ipv6 unicast-routing” command also.

See more: How Many Days In 22 Years In Days, Convert Days To Years, Days In A Year

the next-hop resolve of 2 different surrounding routers.*an bureaucratic distance of 2.